|
ASTM Standards for Lath & Plaster
- C-28 - Specification for Gypsum Plasters
- C-35 - Specification for Aggregates for Use in Gypsum Plaster
- C-36 - Specification for Gypsum Wallboard
- C-37 - Specification for Gypsum Lath
- C-59 - Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
- C-61 - Specification for Gypsum Keene's Cement
- C-70 - Specification for Treated Core and Non-Treated Core Gypsum Sheathing Board
- C-91 - Specification for Masonry Cement
- C-150 - Specification for Portland Cement
- C-645 - Specification for Nonstructural Steel Framing Members
- C-754 - Specification for Installation of Steel Framing Members to Receive Screw Attached Gypsum Panel Products
- C-840 - Specification for Application and Finishing of Gypsum Board
- C-841 - Specification for Installation of Interior Lathing and Furring
- C-842 - Specification for Application of Interior Gypsum Plaster
- C-843 - Specification for Application of Gypsum Veneer Plaster
- C-844 - Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- C-847 - Specification for Metal Lath
- C-897 - Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
- C-926 - Specification for Application of Portland Cement-Based Plaster
- C-931 - Specification for Exterior Gypsum Soffit Board
- C-932 - Specification for Surface Applied Bonding Compounds for Exterior Plastering
- C-933 - Specification for Welded Wire Lath
- C-954 - Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84) mm) to 0.112 in. (2.84 mm) in Thickness
- C-955 - Specification for Load Bearing (Transverse and Axial) Steel Studs, Runners (Tracks) and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
These Specifications are in the ASTM Standards, Section Four-Construction. Vol. 04.01-Cement; Lime; Gypsum. The Volume or individual Specifications may be purchased by calling ASTM at 1-610-832-9585 or at www.astm.org.
|
